Deoxygenation Membrane Equipment Suppliers and Factory in China for Effective Water Treatment Solutions
⚙Working Principle
The core working principle of the deoxygenation membrane equipment is based on Henry's Law and the gas-liquid mass transfer process. Henry's Law states that at a constant temperature, the equilibrium concentration of a dissolved gas in a liquid is directly proportional to the partial pressure of that gas in the gas phase. The equipment uses a hydrophobic microporous hollow fiber membrane as the gas-liquid contact interface, creating a dissolved oxygen concentration gradient across the membrane that drives oxygen molecules to migrate from the liquid phase to the gas phase.
The membrane material is selected from hydrophobic polymers such as polypropylene (PP) or polyvinylidene fluoride (PVDF). The pore size of the membrane micro-pores ranges from 0.01 to 0.1 micrometers. The hydrophobic nature prevents the water phase from penetrating the membrane pores, while gas molecules dissolved in the water can freely pass through the membrane pores into the gas phase side.
💨Vacuum Deoxygenation Mode
A vacuum pump creates a negative pressure environment on the gas phase side of the membrane module, bringing the oxygen partial pressure on the gas phase side close to zero. Water containing dissolved oxygen flows on the liquid phase side of the membrane module. Driven by the partial pressure difference, oxygen molecules pass through the membrane pores into the gas phase side and are continuously discharged by the vacuum pump. In this mode, the outlet dissolved oxygen concentration can be reduced to below 1 μg/L.
🧪High-purity Nitrogen Gas (Purity ≥ 99.999%)
Is introduced into the gas phase side of the membrane module as a sweep gas. The high-purity nitrogen maintains an extremely low oxygen partial pressure on the gas phase side. Driven by the concentration gradient, dissolved oxygen in the liquid phase passes through the membrane pores into the gas phase side and is discharged along with the sweep gas. In this mode, the outlet dissolved oxygen concentration can be reduced to below 5 μg/L.
The two modes can be selected based on actual operating conditions. The vacuum mode is suitable for applications with strict requirements for outlet dissolved oxygen levels; the nitrogen sweep mode is suitable for sites with a stable supply of nitrogen. The equipment can operate within a temperature range of 5 to 40 degrees Celsius, with an inlet water pressure range of 0.1 to 0.5 MPa.
🏗Equipment Structure and Core Components
The deoxygenation membrane equipment consists of a membrane contactor unit, a vacuum system or sweep gas system, and piping and control systems. The membrane contactor is the core component of the equipment, internally packed with hollow fiber membranes arranged in bundles, with both ends potted and fixed using epoxy resin, and the whole assembly enclosed in a stainless steel or engineering plastic housing. The housing has four ports: two for the liquid phase and two for the gas phase.
The liquid phase side is equipped with an inlet and an outlet. Water flows either inside or outside the membrane fibers, resulting in either an inside-out or outside-in flow path design depending on the membrane module configuration. The gas phase side is equipped with a vacuum port or sweep gas inlet/outlet ports. The control system includes flow control valves, pressure gauges, vacuum indicators, and online dissolved oxygen monitors for real-time monitoring of equipment operating parameters.
🔄System Process Flow
The deoxygenation membrane system is connected in series after the Reverse Osmosis (RO) or Electrodeionization (EDI) module. Process flow: RO/EDI permeate enters the feed pump, is pressurized, and sent to the shell side of the deoxygenation membrane, producing deoxygenated water.
For conditions requiring product water dissolved oxygen below 5 ppb, a two-stage series process is used: the first stage membrane tube side is connected to a vacuum pump, and the second stage membrane tube side uses nitrogen sweep combined with vacuum. The inlet water quality must meet: turbidity
📍Application Fields
✔Ultrapure water preparation for the electronics and semiconductor industry.
✔Boiler makeup water deoxygenation in the power and heating industry.
✔Preparation of water for injection and purified water for the pharmaceutical industry.
✔Deoxygenation of production water in the food and beverage industry.
✔Injection water in the petrochemical industry to reduce corrosion rates.
✔Water for laboratory analysis and precision cleaning applications.
📦Other Products
✉Send Inquiry
❓Frequently Asked Questions
How does the deoxygenation membrane work?
It works based on Henry's Law, using a hydrophobic hollow fiber membrane to create a concentration gradient that drives dissolved oxygen from the water phase into the gas phase.
What is the difference between Vacuum and Nitrogen mode?
Vacuum mode uses a pump to create negative pressure for higher efficiency (below 1 μg/L), while Nitrogen mode uses high-purity nitrogen as a sweep gas to maintain low partial pressure (below 5 μg/L).
What are the water quality requirements for the inlet?
The inlet water should have turbidity
In which industries is this equipment commonly used?
It is widely used in semiconductors (ultrapure water), power plants (boiler makeup), pharmaceuticals, and the food & beverage industry to prevent oxidation.
Can the system achieve dissolved oxygen levels below 5 ppb?
Yes, by using a two-stage series process combining both vacuum and nitrogen sweep modes, the system can achieve oxygen levels below 5 ppb.


