Leave Your Message

Sea Water Purification System For Semiconductor Manufacturing Ultrapure Water

Advanced membrane technologies converting marine resources into ultra-clean process water for high-yield silicon wafer fabrication.

The Convergence of Seawater Desalination & Semiconductor Ultrapure Water (UPW)

Modern microchip manufacturing is one of the most resource-intensive industries in the world, requiring billions of gallons of high-purity water daily. As global freshwater scarcity intensifies and coastal industrial hubs expand, the integration of a Sea Water Purification System For Semiconductor Manufacturing Ultrapure Water has transitioned from a visionary concept to a critical operational necessity. Semiconductor fabrication plants (fabs) require water that is virtually free of any ions, particulates, organic molecules, and dissolved gases. Transforming raw seawater into Ultrapure Water (UPW) requires a multi-stage, highly sophisticated treatment train capable of handling high salinity while maintaining absolute consistency.

✦ Industry Insight: The Scale of Water in Fabs

A single mega-fab can consume between 2 to 4 million gallons of ultrapure water per day—equivalent to the daily water usage of a medium-sized city. Utilizing seawater purification secures a drought-proof water supply, insulating global semiconductor supply chains from local municipal water shortages.

Commercial & Industrial Landscape of Seawater-to-UPW

The global semiconductor market is experiencing unprecedented growth, driven by AI processing units, automotive electronics, and 5G infrastructure. Coastal regions in Taiwan, South Korea, Japan, and the United States are the primary hubs for these advanced fabs. However, these regions are also highly vulnerable to climate-induced droughts. Consequently, leading chipmakers are investing heavily in dedicated seawater desalination facilities to feed their UPW plants.

From a commercial perspective, using desalinated seawater as a source for UPW requires addressing two main challenges: energy consumption and trace contaminant removal. Advanced membrane processes, including energy recovery devices (ERDs) and high-rejection reverse osmosis (RO) systems, have significantly lowered the cost per cubic meter of purified water. Fabs are now designing integrated systems where seawater desalination plants act as the primary raw water intake, feeding directly into the secondary and tertiary polishing loops of the UPW production line.

In-Depth Application Scenarios & Technical Architecture

Converting raw seawater into semiconductor-grade UPW is a complex process that involves three distinct phases: Pretreatment, Primary Desalination, and Ultrapure Polishing.

1. Advanced Pretreatment: Protecting the Membranes

Raw seawater contains high concentrations of suspended solids, algae, bacteria, and organic matter. If these reach the reverse osmosis membranes, they cause rapid fouling and biofouling. Modern systems utilize Ultrafiltration (UF) or Microfiltration (MF) combined with chemical dosing (coagulants and biocide control) to ensure a low Silt Density Index (SDI), protecting the downstream high-pressure RO membranes.

2. Double-Pass Seawater Reverse Osmosis (SWRO)

The core desalination stage typically consists of a double-pass RO configuration. The first pass (SWRO) removes over 99.5% of the bulk salinity. The second pass (BWRO - Brackish Water Reverse Osmosis) refines the permeate, targeting specific problematic ions such as boron, which is highly detrimental to semiconductor manufacturing processes if left untreated.

3. The Ultrapure Water (UPW) Polishing Loop

Once the seawater is desalinated to brackish or fresh water levels, it enters the UPW loop. This stage involves:

  • Electrodeionization (EDI): Continuous electrochemical demineralization to remove remaining trace ions without the need for regenerative chemicals.
  • Ultraviolet (UV) Sterilization & TOC Reduction: High-intensity UV light destroys microbial contaminants and breaks down trace Total Organic Carbon (TOC).
  • Vacuum Degasification: Removes dissolved gases, particularly oxygen and carbon dioxide, which can cause oxidation on silicon wafer surfaces.
  • Mixed Bed Ion Exchange Polishing: The final ionic barrier, ensuring resistivity levels reach the theoretical limit of 18.2 Megohm-cm (MΩ·ft).
  • Ultrafiltration (Point-of-Use): Final filtration to eliminate any remaining sub-micron particles before the water touches the wafers.

✦ The Boron Challenge in Semiconductor Fabs

Boron is naturally abundant in seawater (~4.5 mg/L) and exists as non-ionized boric acid at neutral pH, making it difficult for standard RO membranes to reject. Since boron acts as a p-type dopant in silicon, even trace levels can alter wafer electrical properties. Advanced systems adjust water pH to basic levels (above 9.5) before the second RO pass to ionize boron, allowing the membrane to reject it successfully.

Future Trends in Semiconductor Water Management

As sustainability becomes a core metric for corporate governance, semiconductor manufacturers are focusing on two major trends: Zero Liquid Discharge (ZLD) and energy-efficient desalination.

Zero Liquid Discharge (ZLD): Instead of discharging high-salinity brine back into the ocean, advanced fabs are implementing high-pressure membrane concentration systems (such as DTRO and STRO) to concentrate the brine to near-saturation, followed by crystallizers. This allows fabs to recover up to 98% of their water, minimizing environmental impact on marine ecosystems.

AI-Driven Process Control: Modern seawater purification systems are increasingly integrated with AI and IoT sensors. Real-time monitoring of membrane pressure, flow rates, and water quality parameters allows for predictive maintenance, preventing unexpected shutdowns that could halt multi-million dollar wafer production runs.

Company Profile

Shanghai Tongjie Environmental Technology Co., Ltd., founded in 2010, is recognized as a National High-Tech Enterprise and a Shanghai Specialized & Sophisticated Enterprise. The company specializes in membrane-based applications, integrating R&D, design, manufacturing, engineering, and operation services.

Holding Class II contracting qualifications in environmental protection engineering as well as mechanical and electrical installation, the company focuses its business on fields such as seawater desalination, industrial pure water, water reuse, high-salinity wastewater and zero liquid discharge (ZLD), and oilfield produced water. The company holds multiple invention and utility patents, software copyrights, and has obtained ISO certifications.

17+
Years Experience
38+
Patents
50+
R&D Team
1000+
Partners

Our Certifications

Our commitment to quality, environment, and safety is backed by international standards.

CE Certification
ISO 9001 Certification
ISO 14001 Certification
ISO 45001 Certification

News and Blogs

Stay updated with our latest project completions, industry exhibitions, and technological breakthroughs.

CPHI & PMEC Event
2026-06-22

The 2026 CPHI & PMEC Event Concluded Successfully

Shanghai Tongjie specializes in pharmaceutical water solutions and driving industry advancement through cutting-edge technologies.

Read More →
Integrated Membrane Desalination
2026-06-02

Integrated Membrane Desalination Equipment

Low investment, flexible deployment, and reliable operation for diverse global water scenarios using advanced membrane tech.

Read More →
Algeria Desalination Project
2026-06-02

EnergySmart Desalination in Algeria Project

Sinosteel and Tosyali partner with Tongjie Environmental on a large-scale 80,000 m³/day seawater desalination plant.

Read More →

Send Your Customized Requirements

Looking forward to your personalized generation. Contact us today to receive a free quote and experience the quality of our products firsthand.

Talk About Your Needs